HomeStore

Blackstar Dept 10 AMPED 3 100-watt Guitar Amplifier Pedal

Product image 1
Product image 2
Product image 3
Product image 4
Product image 5

Blackstar Dept 10 AMPED 3 100-watt Guitar Amplifier Pedal

The 100W Multi-Channel, High-Gain Amp Pedal

The Blackstar Dept. 10 AMPED 3 is a powerful 100-watt guitar amp head designed to fit seamlessly on your pedalboard. This compact floorboard amplifier captures the authentic tone and feel of a traditional tube amp, offering three distinct channels, each with two selectable voices that range from clean tones to rich distortion. With extensive sound shaping options, including a 3-band EQ, Presence control, and Blackstar's signature ISF control, you can easily tailor your sound to perfection.

In addition to footswitchable Boost and Reverb, the AMPED 3 features a high-quality effects loop, MIDI control, and 9-volt pedal power outputs for added convenience. The amp also incorporates Blackstar’s innovative Cab Rig DSP speaker simulation, allowing you to record or perform with studio-quality miked-cab tones via USB-C. Plus, you can store and recall your favorite settings as patches, making it easy to switch between tones on the fly. Whether connecting to an 8- or 16-ohm speaker cabinet or using it for direct recording, the AMPED 3 delivers impressive versatility and performance.

Features

  • Gain, Bass, Middle, Treble, ISF, and Master knobs give you ample sound-shaping options
  • 3 channels (Clean, Crunch, and Overdrive) range from high-headroom clean to uber-saturated distortion
  • 3-way Response switch tailors the feel of the power amp with EL84, EL34, and 6L6 characteristics
  • 3-way Power switch selects between 100 watts, 20 watts, and 1 watt
  • Footswitchable Boost can be positioned before or after the preamp
  • Reverb with 2-way Dark/Light character switch
  • Cab Rig speaker simulation re-creates a speaker, cabinet, mic, and room with no latency or phase mismatches
  • Architect software allows you to deep dive into Cab Rig’s features
  • Balanced mono XLR output, stereo TRS headphones output, and built-in 4-in/2-out USB-C audio interface
  • 3-way Cab Rig selector switch and Level knob offer even more flexibility
  • 2 x 9-volt DC outputs allow powering external pedals up to a combined 500mA
  • 8- and 16-ohm speaker cabinet outputs
  • Effects loop for integrating your pedalboard and rackmount gear
  • MIDI I/O for sending and receiving MIDI CC messages
  • Settings can be stored as an easily recallable patch
 

Specs

  • Type:Solid State
  • Number of Channels:3
  • Total Power:100W
  • Reverb:Yes
  • Effects:Boost
  • EQ:3-band EQ
  • Amp Modeling:Yes
  • Number of Models:3 x Valve Response, ISF Control, 3 x Cab Rig Presets
  • Inputs:1 x 1/4"
  • Outputs:1 x 1/4" (out), 1 x XLR (cab sim out), 2 x 1/4" (8 ohm, 16 ohm)
  • Headphones:1 x 1/4" TRS (line out/headphone)
  • Effects Loop:2 x 1/4" TS (+4dB, -10dB)
  • MIDI I/O:2 x 1/8" (in, thru)
  • USB:1 x Type-C (4-channel recording)
  • Computer Connectivity:USB
  • Software:Architect, CabRig
  • Features:USB Audio Interface
  • Construction Material:Aluminum Housing
  • Power Source:Standard IEC AC cable, 2 x 9V 500mA Power Outputs
  • Height:3.14"
  • Width:11.22"
  • Depth:5.9"
  • Weight:3.88 lbs.
$212.11

Original: $606.04

-65%
Blackstar Dept 10 AMPED 3 100-watt Guitar Amplifier Pedal—

$606.04

$212.11

Product Information

Shipping & Returns

Description

The 100W Multi-Channel, High-Gain Amp Pedal

The Blackstar Dept. 10 AMPED 3 is a powerful 100-watt guitar amp head designed to fit seamlessly on your pedalboard. This compact floorboard amplifier captures the authentic tone and feel of a traditional tube amp, offering three distinct channels, each with two selectable voices that range from clean tones to rich distortion. With extensive sound shaping options, including a 3-band EQ, Presence control, and Blackstar's signature ISF control, you can easily tailor your sound to perfection.

In addition to footswitchable Boost and Reverb, the AMPED 3 features a high-quality effects loop, MIDI control, and 9-volt pedal power outputs for added convenience. The amp also incorporates Blackstar’s innovative Cab Rig DSP speaker simulation, allowing you to record or perform with studio-quality miked-cab tones via USB-C. Plus, you can store and recall your favorite settings as patches, making it easy to switch between tones on the fly. Whether connecting to an 8- or 16-ohm speaker cabinet or using it for direct recording, the AMPED 3 delivers impressive versatility and performance.

Features

  • Gain, Bass, Middle, Treble, ISF, and Master knobs give you ample sound-shaping options
  • 3 channels (Clean, Crunch, and Overdrive) range from high-headroom clean to uber-saturated distortion
  • 3-way Response switch tailors the feel of the power amp with EL84, EL34, and 6L6 characteristics
  • 3-way Power switch selects between 100 watts, 20 watts, and 1 watt
  • Footswitchable Boost can be positioned before or after the preamp
  • Reverb with 2-way Dark/Light character switch
  • Cab Rig speaker simulation re-creates a speaker, cabinet, mic, and room with no latency or phase mismatches
  • Architect software allows you to deep dive into Cab Rig’s features
  • Balanced mono XLR output, stereo TRS headphones output, and built-in 4-in/2-out USB-C audio interface
  • 3-way Cab Rig selector switch and Level knob offer even more flexibility
  • 2 x 9-volt DC outputs allow powering external pedals up to a combined 500mA
  • 8- and 16-ohm speaker cabinet outputs
  • Effects loop for integrating your pedalboard and rackmount gear
  • MIDI I/O for sending and receiving MIDI CC messages
  • Settings can be stored as an easily recallable patch
 

Specs

  • Type:Solid State
  • Number of Channels:3
  • Total Power:100W
  • Reverb:Yes
  • Effects:Boost
  • EQ:3-band EQ
  • Amp Modeling:Yes
  • Number of Models:3 x Valve Response, ISF Control, 3 x Cab Rig Presets
  • Inputs:1 x 1/4"
  • Outputs:1 x 1/4" (out), 1 x XLR (cab sim out), 2 x 1/4" (8 ohm, 16 ohm)
  • Headphones:1 x 1/4" TRS (line out/headphone)
  • Effects Loop:2 x 1/4" TS (+4dB, -10dB)
  • MIDI I/O:2 x 1/8" (in, thru)
  • USB:1 x Type-C (4-channel recording)
  • Computer Connectivity:USB
  • Software:Architect, CabRig
  • Features:USB Audio Interface
  • Construction Material:Aluminum Housing
  • Power Source:Standard IEC AC cable, 2 x 9V 500mA Power Outputs
  • Height:3.14"
  • Width:11.22"
  • Depth:5.9"
  • Weight:3.88 lbs.

You may also like

-65%NEW
Thumbnail 1Thumbnail 2

Fender Super Sonic 22 Black 22W 1X12 Combo Tube Amp

$1,926.61

$674.31

-65%NEW
Thumbnail 1Thumbnail 2

Marshall JVM205C - 50W 2x12 Combo

$2,497.67

$874.18

-65%NEW
Thumbnail 1Thumbnail 2

Marshall JCM800 2203 - 100W Amp Head

$3,568.40

$1,248.94

-65%NEW
Thumbnail 1Thumbnail 2

Marshall JCM900 4100 - 100W Tube Amp Head

$2,397.73

$839.21

-65%NEW
Thumbnail 1Thumbnail 2

Marshall JVM410H - 100W Tube Amp Head

$2,497.67

$874.18

-65%NEW
Thumbnail 1Thumbnail 2

Marshall JVM205H - 50W Tube Amp Head

$2,097.93

$734.28

-65%NEW
Thumbnail 1Thumbnail 2

Fender Bassbreaker 18/30 - 18/30W 2X12 Combo Tube Amp

$1,305.32

$456.86

-65%NEW
Thumbnail 1Thumbnail 2

Fender Bassbreaker 007 - 7W Tube Amp Head

$570.34

$199.62

-65%NEW
Thumbnail 1Thumbnail 2

Fender 68 Custom Deluxe Reverb - 22W 1X12 Combo Tube Amp

$1,525.44

$533.90

-65%NEW
Thumbnail 1Thumbnail 2

Fender 59 Bassman - 45W 4X10 Combo Tube Amp

$2,140.76

$749.27

-65%NEW
Thumbnail 1Thumbnail 2

Fender Bassbreaker 45 – 45W Tube Amp Head

$870.15

$304.55

-65%NEW
Thumbnail 1Thumbnail 2

Marshall 1962 Bluesbreaker Reissue - 30W 2X12 Combo Amp

$3,568.40

$1,248.94

Blackstar Dept 10 AMPED 3 100-watt Guitar Amplifier Pedal | Sky Music